Pod::Text(3perl) Perl Programmers Reference Guide Pod::Text(3perl)
NAME
Pod::Text - Convert POD data to formatted text
SYNOPSIS
use Pod::Text;
my $parser = Pod::Text->new (sentence => 1, width => 78);
# Read POD from STDIN and write to STDOUT.
$parser->parse_from_filehandle;
# Read POD from file.pod and write to file.txt.
$parser->parse_from_file ('file.pod', 'file.txt');
DESCRIPTION
Pod::Text is a module that can convert documentation in the POD format
(the preferred language for documenting Perl) into formatted text. It
uses no special formatting controls or codes, and its output is
therefore suitable for nearly any device.
Encoding
Pod::Text uses the following logic to choose an output encoding, in
order:
1. If a PerlIO encoding layer is set on the output file handle, do not
do any output encoding and will instead rely on the PerlIO encoding
layer.
2. If the "encoding" or "utf8" options are set, use the output
encoding specified by those options.
3. If the input encoding of the POD source file was explicitly
specified (using "=encoding") or automatically detected by
Pod::Simple, use that as the output encoding as well.
4. Otherwise, if running on a non-EBCDIC system, use UTF-8 as the
output encoding. Since this is a superset of ASCII, this will
result in ASCII output unless the POD input contains non-ASCII
characters without declaring or autodetecting an encoding (usually
via E<> escapes).
5. Otherwise, for EBCDIC systems, output without doing any encoding
and hope this works.
One caveat: Pod::Text has to commit to an output encoding the first
time it outputs a non-ASCII character, and then has to stick with it
for consistency. However, "=encoding" commands don't have to be at the
beginning of a POD document. If someone uses a non-ASCII character
early in a document with an escape, such as E<0xEF>, and then puts
"=encoding iso-8859-1" later, ideally Pod::Text would follow rule 3 and
output the entire document as ISO 8859-1. Instead, it will commit to
UTF-8 following rule 4 as soon as it sees that escape, and then stick
with that encoding for the rest of the document.
Unfortunately, there's no universally good choice for an output
encoding. Each choice will be incorrect in some circumstances. This
approach was chosen primarily for backwards compatibility. Callers
should consider forcing the output encoding via "encoding" if they have
any knowledge about what encoding the user may expect.
In particular, consider importing the Encode::Locale module, if
available, and setting "encoding" to "locale" to use an output encoding
appropriate to the user's locale. But be aware that if the user is not
using locales or is using a locale of "C", Encode::Locale will set the
output encoding to US-ASCII. This will cause all non-ASCII characters
will be replaced with "?" and produce a flurry of warnings about
unsupported characters, which may or may not be what you want.
CLASS METHODS
new(ARGS)
Create a new Pod::Text object. ARGS should be a list of key/value
pairs, where the keys are chosen from the following. Each option
is annotated with the version of Pod::Text in which that option was
added with its current meaning.
alt [2.00] If set to a true value, selects an alternate output
format that, among other things, uses a different heading style
and marks "=item" entries with a colon in the left margin.
Defaults to false.
code
[2.13] If set to a true value, the non-POD parts of the input
file will be included in the output. Useful for viewing code
documented with POD blocks with the POD rendered and the code
left intact.
encoding
[5.00] Specifies the encoding of the output. The value must be
an encoding recognized by the Encode module (see
Encode::Supported). If the output contains characters that
cannot be represented in this encoding, that is an error that
will be reported as configured by the "errors" option. If
error handling is other than "die", the unrepresentable
character will be replaced with the Encode substitution
character (normally "?").
If the output file handle has a PerlIO encoding layer set, this
parameter will be ignored and no encoding will be done by
Pod::Man. It will instead rely on the encoding layer to make
whatever output encoding transformations are desired.
WARNING: The input encoding of the POD source is independent
from the output encoding, and setting this option does not
affect the interpretation of the POD input. Unless your POD
source is US-ASCII, its encoding should be declared with the
"=encoding" command in the source, as near to the top of the
file as possible. If this is not done, Pod::Simple will will
attempt to guess the encoding and may be successful if it's
Latin-1 or UTF-8, but it will produce warnings. See perlpod(1)
for more information.
errors
[3.17] How to report errors. "die" says to throw an exception
on any POD formatting error. "stderr" says to report errors on
standard error, but not to throw an exception. "pod" says to
include a POD ERRORS section in the resulting documentation
summarizing the errors. "none" ignores POD errors entirely, as
much as possible.
The default is "pod".
guesswork
[5.01] By default, Pod::Text applies some default formatting
rules based on guesswork and regular expressions that are
intended to make writing Perl documentation easier and require
less explicit markup. These rules may not always be
appropriate, particularly for documentation that isn't about
Perl. This option allows turning all or some of it off.
The special value "all" enables all guesswork. This is also
the default for backward compatibility reasons. The special
value "none" disables all guesswork. Otherwise, the value of
this option should be a comma-separated list of one or more of
the following keywords:
quoting
If no guesswork is enabled, any text enclosed in C<> is
surrounded by double quotes in nroff (terminal) output
unless the contents are already quoted. When this
guesswork is enabled, quote marks will also be suppressed
for Perl variables, function names, function calls,
numbers, and hex constants.
Any unknown guesswork name is silently ignored (for potential
future compatibility), so be careful about spelling.
indent
[2.00] The number of spaces to indent regular text, and the
default indentation for "=over" blocks. Defaults to 4.
loose
[2.00] If set to a true value, a blank line is printed after a
"=head1" heading. If set to false (the default), no blank line
is printed after "=head1", although one is still printed after
"=head2". This is the default because it's the expected
formatting for manual pages; if you're formatting arbitrary
text documents, setting this to true may result in more
pleasing output.
margin
[2.21] The width of the left margin in spaces. Defaults to 0.
This is the margin for all text, including headings, not the
amount by which regular text is indented; for the latter, see
the indent option. To set the right margin, see the width
option.
nourls
[3.17] Normally, L<> formatting codes with a URL but anchor
text are formatted to show both the anchor text and the URL.
In other words:
L
is formatted as:
foo
This option, if set to a true value, suppresses the URL when
anchor text is given, so this example would be formatted as
just "foo". This can produce less cluttered output in cases
where the URLs are not particularly important.
quotes
[4.00] Sets the quote marks used to surround C<> text. If the
value is a single character, it is used as both the left and
right quote. Otherwise, it is split in half, and the first
half of the string is used as the left quote and the second is
used as the right quote.
This may also be set to the special value "none", in which case
no quote marks are added around C<> text.
sentence
[3.00] If set to a true value, Pod::Text will assume that each
sentence ends in two spaces, and will try to preserve that
spacing. If set to false, all consecutive whitespace in non-
verbatim paragraphs is compressed into a single space.
Defaults to false.
stderr
[3.10] Send error messages about invalid POD to standard error
instead of appending a POD ERRORS section to the generated
output. This is equivalent to setting "errors" to "stderr" if
"errors" is not already set. It is supported for backward
compatibility.
utf8
[3.12] If this option is set to a true value, the output
encoding is set to UTF-8. This is equivalent to setting
"encoding" to "UTF-8" if "encoding" is not already set. It is
supported for backward compatibility.
width
[2.00] The column at which to wrap text on the right-hand side.
Defaults to 76.
INSTANCE METHODS
As a derived class from Pod::Simple, Pod::Text supports the same
methods and interfaces. See Pod::Simple for all the details. This
section summarizes the most-frequently-used methods and the ones added
by Pod::Text.
output_fh(FH)
Direct the output from parse_file(), parse_lines(), or
parse_string_document() to the file handle FH instead of "STDOUT".
output_string(REF)
Direct the output from parse_file(), parse_lines(), or
parse_string_document() to the scalar variable pointed to by REF,
rather than "STDOUT". For example:
my $man = Pod::Man->new();
my $output;
$man->output_string(\$output);
$man->parse_file('/some/input/file');
Be aware that the output in that variable will already be encoded
(see "Encoding").
parse_file(PATH)
Read the POD source from PATH and format it. By default, the
output is sent to "STDOUT", but this can be changed with the
output_fh() or output_string() methods.
parse_from_file(INPUT, OUTPUT)
parse_from_filehandle(FH, OUTPUT)
Read the POD source from INPUT, format it, and output the results
to OUTPUT.
parse_from_filehandle() is provided for backward compatibility with
older versions of Pod::Man. parse_from_file() should be used
instead.
parse_lines(LINES[, ...[, undef]])
Parse the provided lines as POD source, writing the output to
either "STDOUT" or the file handle set with the output_fh() or
output_string() methods. This method can be called repeatedly to
provide more input lines. An explicit "undef" should be passed to
indicate the end of input.
This method expects raw bytes, not decoded characters.
parse_string_document(INPUT)
Parse the provided scalar variable as POD source, writing the
output to either "STDOUT" or the file handle set with the
output_fh() or output_string() methods.
This method expects raw bytes, not decoded characters.
FUNCTIONS
Pod::Text exports one function for backward compatibility with older
versions. This function is deprecated; instead, use the object-
oriented interface described above.
pod2text([[-a,] [-NNN,]] INPUT[, OUTPUT])
Convert the POD source from INPUT to text and write it to OUTPUT.
If OUTPUT is not given, defaults to "STDOUT". INPUT can be any
expression supported as the second argument to two-argument open().
If "-a" is given as an initial argument, pass the "alt" option to
the Pod::Text constructor. This enables alternative formatting.
If "-NNN" is given as an initial argument, pass the "width" option
to the Pod::Text constructor with the number "NNN" as its argument.
This sets the wrap line width to NNN.
DIAGNOSTICS
Bizarre space in item
Item called without tag
(W) Something has gone wrong in internal "=item" processing. These
messages indicate a bug in Pod::Text; you should never see them.
Can't open %s for reading: %s
(F) Pod::Text was invoked via the compatibility mode pod2text()
interface and the input file it was given could not be opened.
Invalid errors setting "%s"
(F) The "errors" parameter to the constructor was set to an unknown
value.
Invalid quote specification "%s"
(F) The quote specification given (the "quotes" option to the
constructor) was invalid. A quote specification must be either one
character long or an even number (greater than one) characters
long.
POD document had syntax errors
(F) The POD document being formatted had syntax errors and the
"errors" option was set to "die".
COMPATIBILITY
Pod::Text 2.03 (based on Pod::Parser) was the first version of this
module included with Perl, in Perl 5.6.0. Earlier versions of Perl had
a different Pod::Text module, with a different API.
The current API based on Pod::Simple was added in Pod::Text 3.00.
Pod::Text 3.01 was included in Perl 5.9.3, the first version of Perl to
incorporate those changes. This is the first version that correctly
supports all modern POD syntax. The parse_from_filehandle() method was
re-added for backward compatibility in Pod::Text 3.07, included in Perl
5.9.4.
Pod::Text 3.12, included in Perl 5.10.1, first implemented the current
practice of attempting to match the default output encoding with the
input encoding of the POD source, unless overridden by the "utf8"
option or (added later) the "encoding" option.
Support for anchor text in L<> links of type URL was added in Pod::Text
3.14, included in Perl 5.11.5.
parse_lines(), parse_string_document(), and parse_file() set a default
output file handle of "STDOUT" if one was not already set as of
Pod::Text 3.18, included in Perl 5.19.5.
Pod::Text 4.00, included in Perl 5.23.7, aligned the module version and
the version of the podlators distribution. All modules included in
podlators, and the podlators distribution itself, share the same
version number from this point forward.
Pod::Text 4.09, included in Perl 5.25.7, fixed a serious bug on EBCDIC
systems, present in all versions back to 3.00, that would cause opening
brackets to disappear.
Pod::Text 5.00 now defaults, on non-EBCDIC systems, to UTF-8 encoding
if it sees a non-ASCII character in the input and the input encoding is
not specified. It also commits to an encoding with the first non-ASCII
character and does not change the output encoding if the input encoding
changes. The Encode module is now used for all output encoding rather
than PerlIO layers, which fixes earlier problems with output to
scalars.
AUTHOR
Russ Allbery , based very heavily on the original
Pod::Text by Tom Christiansen and its conversion
to Pod::Parser by Brad Appleton . Sean Burke's
initial conversion of Pod::Man to use Pod::Simple provided much-needed
guidance on how to use Pod::Simple.
COPYRIGHT AND LICENSE
Copyright 1999-2002, 2004, 2006, 2008-2009, 2012-2016, 2018-2019, 2022
Russ Allbery
This program is free software; you may redistribute it and/or modify it
under the same terms as Perl itself.
SEE ALSO
Encode::Locale, Encode::Supproted, Pod::Simple, Pod::Text::Termcap,
perlpod(1), pod2text(1)
The current version of this module is always available from its web
site at . It is also
part of the Perl core distribution as of 5.6.0.
perl v5.38.2 2024-02-11 Pod::Text(3perl)